Skip to main content

Pick to Light System

MONK is a UK-based conveyor and automation specialist with over 25 years’ experience in conveyor systems, conveyor manufacturing, system integration and industrial automation. From standard conveyors to complex conveyor systems that automatically route products and materials to operators or machines.

  • Prioritises speed, efficiency and accuracy
  • Designed to be easy to use
  • Reduces chances of error
  • Prioritises speed, efficiency and accuracy
  • Designed to be easy to use
  • Reduces chances of error
  • What is Pick to Light? 60 Second Explainer

    From standard conveyors to complex conveyor systems that automatically route products and materials to operators or machines.

    Pick to Light Introduction and Overview

    From standard conveyors to complex conveyor systems that automatically route products and materials to operators or machines.

    Trusted by

    Fitting Big Efficiency into Small spaces

    MONK is a UK-based conveyor and automation specialist with over 25 years’ experience in conveyor systems, conveyor manufacturing, system integration and industrial automation.

    Pick to Light Process

    The typical Pick to Light process uses our hand-held barcode system which would read barcode or QR code label on both the product and the pick locations. Due to each factory or warehouse operating with slightly different methods, our Pick to Light system can be tailored to suit your particular process. The pick locations can be set by a) all the same Part Number in one location b) all of a Job/Kit in one location.

    Picking Staff would scan a pick sheet, dispatch note or even a carton or tote.

    Our system would retrieve information relating to that particular Job/Kit.

    The pick location(s) would light and staff would pick the products.

    They would scan each product and the location to confirm correct picking.

    They would scan each product and the location to confirm correct picking.

    They would scan each product and the location to confirm correct picking.

    Location by Part Number: This means that all the parts in one location are exactly the same and staff can pick a single, or number of products from the location when the light is on.

    Location by Job/Kit: This means that parts in one location are to make up one particular Jon/Kit and therefore may not be all the same. It could be that there are 5 different parts from a number of different suppliers required to make up one complete Job/Kit. As parts are delivered during the day they would be put in the location. When all the parts are complete it would light for picking.

    From design to installation,

    MONK is a UK-based conveyor and automation specialist with over 25 years’ experience in conveyor systems, conveyor manufacturing, system integration and industrial automation. From standard conveyors to complex conveyor systems that automatically route products and materials to operators or machines.

    Put Away to Light

    The same Pick to Light process can also be used to put products away. A product barcode would be scanned and a location would light up to show staff where to put the product.

    Products can therefore be put away by Part Number or to complete a Job/Kit. This can make putting parts away extremely fast and efficient; it will also reduce the chance of products being put in the wrong location.

    Due to the size of the storage area, the Pick to Light face is normally split into zones. By grouping together work in zones it reduces the amount of walking and makes it easy for staff to look for the pick light. A typical zone being around 5 to 8 metres long.

    Depending on the operation within the factory the same staff can often be used for both picking and put away. A typical scenario is where deliveries arrive in the

    morning and goods are dispatched in the afternoon/evening. Staff can unpack and put away product as it arrives in the morning and then switch to picking in the afternoon.

    Staff can easily switch between Pick and Put Away through the day as deliveries arrive at different times. Due to the efficiency of the Pick to Light system, a small number of staff can operate a large picking area.

    Conveyors are often used to bring individual product, trays, tote bins or cartons to the pick face and directly to the correct pick zone. This means that staff can work within a zone where product is automatically brought to them and completed work is automatically take away once picking is completed. This improves picking and put away efficiency.

    Pocket – Pick to Light System

    Suitable for small products in the Optical Industry, Pharmaceutical, Medical kits, Tablets, Drugs and Dispensary.

    Pick to Light Introduction and Overview

    Suitable for small products in the Optical Industry, Pharmaceutical, Medical kits, Tablets, Drugs and Dispensary.

    Pick to Light Key Features

  • Cost-effective design which is customisable

  • High and low volume applications

  • Compact with minimal floor space

  • Cost-effective design which is customisable

  • High and low volume applications

  • Compact with minimal floor space

  • Storage buffer system

  • Collates parts together

  • Put away and pick parts to light

  • Storage buffer system

  • Collates parts together

  • Put away and pick parts to light

  • Pick to Light and Barcode Software

    Our Pick to Light software controls the LED lighting of all locations. The number of locations can range from a few hundred to twenty thousand and above. Our addressable light system eliminates the need for large amounts of wiring leaving a simple and easy to maintain design.

    Our ethernet and wireless barcode system means staff can freely move around the warehouse area and pick face using the latest handheld barcode scanners.

    Data retrieval is carried out with out Monk Web call software which will communicate with the customer warehouse management system or factory database software. This enables us to retrieve job information, bills of materials and part numbers to then either store or use for routing and storing product.

    Our database system records the location of everything within the Pick Face store.

    Remote access to both the PC/PLC and barcode system means that we can provide comprehensive support and servicing. Please contact us for further information on our Pick to Light Systems.

    PC Based with PLC Conveyor Control

  • Automatically starts on PC Reboot

  • Password Protected maintenance functions

  • 24 Hour Activity Log

  • Handshake to PLC

  • Informative Alarm system to assist fault finding

  • Request Old Data function to upload 24 hours of data in event of a PLC issue

  • Integration of BCR and RFID into the conveyor control system allows HMI display of current job number, relevant job details and job destination

  • Colour changing LED’s for clear location info

  • Cancelled Order light feature

  • Store Check light feature