Lens Surfacing Conveyor – Generator and Polisher
Our lens surfacing feed system continually feeds to generator and polisher machines. An operator can manage a line of one type of machine only, therefore reducing the need for training on many different machine types.
The lens surfacing conveyor will make sure each machine is constantly fed with work for maximum machine use. If one machine is not operating, work will automatically be directed to other machines.
Software handles processed and unprocessed jobs on a single conveyor saving valuable floor space.
Key Features
Single main feed conveyor minimises floor space
Operators can manage a line of 4 to 6 of the same type of machine, minimising potential training.
Machines can be switched off for maintenance and the line will keep operating
Quiet and smooth operation
Pneumatic low pressure pushers for safe operator use
Optional line mimic with fault flags
Typical speeds of around 150 trays per hour per production Cell*. A number of Cells can be laid out for an efficient flow of work
Maintains good access to machines
Trays queue into machines and sensors make sure the machines stay full
Independent control and software system
HMI touch screen for easy operation
Emergency stop safety circuit
Optional bar code system to route trays to specific machines
*Feed rates vary depending on the size and speed of the machines.