Skip to main content

Optical Manufacturing Equipment

Auto Stacking Equipment

Lens tray stacker at the end of a Spectacle Lens Line

Download PDF Brochure

 

Optical Tray Lift

Two single lifts, independently transferring product from high-level conveyors. High level conveyors give engineers good access to optical manufacturing equipment on the production line.

Download PDF Brochure

Trusted by

Optical Single Lift

  • 3D Cad drawing

  • Lift over 3 floors

  • Control system

  • Emergency stops

  • Optical Manufacturing Multi-Lane Store

    Trays containing optical components are automatically loaded into one of five lanes in the storage system where they wait in a queue. There are 16 trays in each lane giving a storage capacity of 80 trays. One Flex Chain ‘Load/Unload Conveyor’ runs the complete length of the optical manufacturing system, from the tray storage system past all six machines to an out-feed conveyor.

    Lens High Speed Load/Unload Conveyor

    The ‘Load/Unload Conveyor’ has 5 load units and 5 unload units together with sensors and stop gates. The Load/Unload conveyor system is controlled by a PLC (programmable logic controller) which communicates with the five machines PLCs. Sending and receiving signals concerning the loading and unloading of trays

    Fitting Big Efficiency into Small spaces

    MONK is a UK-based conveyor and automation specialist with over 25 years’ experience in conveyor systems, conveyor manufacturing, system integration and industrial automation.

    Optical Tray Escapement

    This unit is used to stop the queue of trays and then separate the leading tray.

    Optical Cross Push Escapement

    The queue of trays is stopped and the leading tray is separated and transferred to a second position at 90 degrees to the queue. This is mainly used to load process machines or to divert designated trays onto a separate line.

    Lens 5 Way Stores Loader

    Boxed lenses are manually placed on an infeed conveyor. Barcodes are checked and the boxes automatically placed onto an inclined conveyor leading to the stores. Boxes are allocated a destination of either Store 1, 2, 3, 4 or 5.

    Optical Box Separator

    Auto Input:- Boxed lenses are manually placed on an in feed conveyor. Barcodes are checked and the boxes automatically placed onto an inclined conveyor leading to the stores.

    Lens Tray Diverter

    A lens tray diverter is a crucial part of the optical manufacturing process due to its ability to divert trays onto a separate conveyor, much like a railway point.

    From design to installation,

    MONK is a UK-based conveyor and automation specialist with over 25 years’ experience in conveyor systems, conveyor manufacturing, system integration and industrial automation. From standard conveyors to complex conveyor systems that automatically route products and materials to operators or machines.